Wifi Router:
I think our home network is very important. We bring a Wi-fi router to use our home network. After setting up the Wi-fi router, we set it up for use. There are many types of Wi-fi routers like TP-Link, Tenda, D-LINK, Asus, BDCOM, Etc. An important feature has now been added to all phones. That is the Wifi Scanning feature. By scanning the Wifi Qr code you can make a Wifi Connect even without knowing the password. So you no longer need a password to connect to any WiFi Router.
How can I remove the QR code from the TP-Link router?
If you want to disable or remove the QR Code Scanning option from your TP-Link router then you need to enable the Wireless MAC Filtering feature. Using this feature will increase the security of your TP-Link router.
What is wireless MAC Filtering TP-Link?
Wireless mac filtering is a feature using which you can specify which devices can be connected through Wireless and which devices cannot be connected. This is the function of this feature. So enabling this feature increases router security. After enabling it, the devices you want will be connected to your router, and the devices you don't want will be doesn't connect to your router.
TP-Link Router Default Info:
*TP-Link Default IP: 192.168.0.1
*TP-Link Default Username: admin
*TP-Link Default Password: admin
Configuration:
So the configuration of Mac Filtering step by step is given below. I did it with a PC, you can do it with your mobile too. So let's get started.
Step 1:
You Just need to Log in to your wi-fi Router Page Panel. To log in to the router, you need to open any browser on your PC or mobile. Then enter the default IP address of the router.
Step 2:
After logging in to the router, then go to the wireless tool. Then go to Wireless Mac Filtering. Then Click Add New to add your all device's MAC addresses of that device will be connected to your Wi-fi Router.
Then you need to set the MAC address of each device in this way, and then click save.
Step 3:
In this way, each MAC address will be set correctly. Wi-Fi will not connect!! If any device's MAC address is wrong. so be careful to set your Mac address. Once all the MAC addresses have been added, then click on Allow Option.
Step 4:
This is the Final Step! Finally, you need to Enable Mac Filtering.
Conclusion:
The feature should work if your configuration is correct, And if you like the post, don't forget to share it with your friends.