D-Link dir-615 Features
The router of the D-Link DIR-615 model has a maximum speed of 300 Mbps. Its wireless frequency range is 2.4GHz. You can Protect your wireless with two security types, WPA and WPA2. also have Wi-Fi Protected Setup (WPS). The speed of the WAN interface is One 10/100 Mbps and LAN speed of Four 10/100 Mbps This router has 2 antennas with 5dbi. There are also Multi-session PPTP / L2TP / IPSec.
Whole-Configuration
You can easily configure this router. The configuration needs to be completed the same way the ISP will provide internet through the connection type. Today I will show you how to set up a PPPOE connection on this router. You have to follow some steps for that.
1st-Step
The router needs to be connected to your PC or mobile. Then you have to open any browser. There you have to enter the default IP address of the router, 192.18.0.1. After going to the default IP address, the page panel of the router will open.
2nd-Step
This step is crucial. Here you have to select your connection type. Your ISP will tell you which connection type you will select. Otherwise, your ISP will give you access to use the internet. By looking at that access, you must understand which connection type you select. I have selected PPPOE because my ISP gave me internet through PPPOE user and password.
If your ISP is a static internet provider, you must select the static connection type. Or, if you have a statically real IP from your ISP, you also need to choose the static connection type.
3rd-Step
After completing the connection type, you need to come down for wireless configuration. SSID is your Wi-Fi name. And the key is the password of the Wi-fi. You need to choose your Wi-Fi name and password. At the end of all, you have to click on Save and Connect. If your configuration is correct, then your internet connection will come shortly.
4rth-Step
After saving and connecting, the router needs to be reconnected to a mobile or PC. Then open the router page and go to the status tool at the bottom of the WAN Configuration section. If you see IP address, gateway, and DNS in this section, understand that your setup is complete.